MIMAKI JV33-160热升华打印机

MIMAKI JV33-160热升华打印机
Sublimation Printing machine Specifications
JV33-130      JV33-160      JV33-260
Head      On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width      1,361mm (53.5")      1,610mm (63.3")      2,632mm (103.6")
Printing resolution      540,720,1,440dpi
Printing mode
(scan x feed)      540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi,
720 x 1,440dpi
1,440 x 1,440dpi
Ink      Type      Exclusive Solvent ink: ES3 ink, SS21 ink
Exclusive aqueous pigment ink
Exclusive dye sublimation ink
Capacity      4-color mode:440cc cartridge x 2/color, 880cc/color
6-color mode:440cc cartridge x 1/color, 440cc/color
Media      Size      1,371mm (53.9")      1,620mm (63.9")      2,642mm (104.0")
Roll weight      Less than 25kg (55.1lbs.)      Less than 100kg (220lbs.)
Print surface      Face out
Roll inside diameter      2 inch or 3 inch
Media cutting      Cutting on Y direction by cutter at the head
Media heater      Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device      Roll take-up device (standard), inside/outside selectable
Interface      USB2.0
Applicable standards      VCCI Class A,FCC Class A, UL 60950-1
CE Marking (EMC directive, Low voltage directive),
CB report
Power      AC100~120V±10%, AC220~240V±10%,
50/60Hz±1Hz
Power consumption      Less than 1,440 VA      Less than 1,440 VA x 2 plugs
Operation environments      Usable temperature:20°C~35°C (64~95°F),
Humidity:35~65%RH (No condensation)
Dimensions (W x D x H)      2,289 x 739 x 1,424mm
(90.1" x 29.1" x 56.1")      2,538 x 739 x 1,424mm
(99.9" x 29.1" x 56.1")      3,650 x 1,302 x 1,424mm
( 143.7" x 51.3" x 56.1")
Weight      145kg (320lbs.)      160kg (353lbs.)      450kg (992lbs.)
Some of the samples in this website are artificial renderings.
Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
Creative inkjet technology and high quality ink provides ultra-high resolution printing
Create ultra-high resolution print Piezo inkjet system
Precise control of ink firing reproduces details of photo image at a maximum resolution of 1,440 dpi. Even edges of 4-point text are printed sharp and clear.
4-color mode realizes non-grainy finish Variable dot technology
By producing dots in three different sizes, smooth high resolution graphics are created without a grainy appearance. Even at high speed and in low resolution mode high quality printing is possible.
Ink performance is improved Triple stage intelligent heater
A triple stage intelligent heater automatically heats up the media to the appropriate temperature, thus improving the performance of ink. A newly mounted Post-heater quickens drying time and thus enables a fast take-up of the media.
▲ PAGETOP
Additional features and benefits to improve operation performance
High volumes and lower ink costs MBIS (Mimaki Bulk Ink System)
The bulk ink system using ink packs of aluminum achieves as stable and reliable ink ejection as printing solely with cartridges. It is possible to use both 2-liter ink packs in combination with regular 220/440cc cartridges for colors that are not so often used. In-end detection function to prevent misprints without ink is also available.The bulk ink system is an eco-friendly ink system that produces less waste while achieving continuous printing.
Stable print quality Head height adjustment
Head height can be adjusted to either 2mm or 3mm according to the media thickness. For the aqueous ink model, height head adjustment of either 4mm or 5mm* is available.
*adjustment by technician is required.
Drying speed is increased Automatic drying fan (option)
Drying speed can be improved with the use of a postheater.
The takeup reel can be used even when printing at high speed, improving efficiency and work flow.
Drying speed is increased Automatic drying fan (option)
Drying speed can be improved with the use of a postheater.
The takeup reel can be used even when printing at high speed, improving efficiency and work flow.



广州大笨象数码科技有限公司创始于 2004 年，是一家集生产、代理、售后维护及加工为一体的数码印花公司，代理销售日本武藤、EPSON、MIMAKI 数码打印机，热转印设备，韩国 INKTEC 墨水，意大利J TECK墨水，热转印纸等，专业提供数码印花机与耗材及印花加工一站式服务。 公司自 06年创办数码印花厂，六年专业数码印花、服装印花、真丝印花、纯棉印花、T恤印花、广告礼品、家居用品、箱包印花等印花生产经验。公司设备和印花耗材均为国外引进，热转印墨水及热转印纸等均通过SGS 认证，达到国际质量认证，印花产品颜色鲜艳、丰富逼真、清晰度高、不易褪色、绿色环保，符合欧美出口标准。是国内设备比较齐全的数码印花加工厂。


公 司：广州大笨象数码科技有限公司
广州总厂地址地址：广州市广州市海珠区新港东路70号好得工业园1栋3楼
清远分厂地址：清远市清城区东城开发区48号
数码印花工厂地址：广州市海珠区新港东路70号好得工业园58号
电话总机：(020)85643576 传 真：(020)85542001 前 台：(020)89015371
联系人：刘灿军 网站：http://www.*** http://www.***/product_1154.html